EKA Sharpening Steel 30 cm

Artikkelnr.: 30210

PrisNOK419,00 inkl. mva.
På lager
Ønskeliste

Produktinfo

EKA Pro Sharpening Steel Orange 30 cm - designed to align the edge of the knife and will help to re-align the fibers.

Blade length
300 mm
Total length
440 mm
Blade thickness
13 mm diameter
Weight
399 gram

Description of the EKA® Sharpening Steel Orange 30 cm

The EKA® Sharpening Steel Orange 30 cm is designed to align the edge of the knife. Our sharpening steel will help to re-align the fibers. The more often you steel sharpen, the longer the knife edge will last. Steeling is the most practical and effective way to maintain your knife's edge between the sharpening periods. The quality of the material that EKA1882 is providing with Swedish steel from Alleima, ergonomic and hygienic Santoprene™ handle, is to assure a safe and smooth performance. 

The Sharpening Steel are available in orange handle as a standard color, but it could be produced in various colors for different areas or purposes of use. Contact us for more information.

 

Sharpening Steel recommendation:

  • Please position the steel vertically over any suitable surface.
  • Select the proper angle: in general, most of EKA knives are sharpened to an approximately 20-degree angle, hold your knife at a 20- degree angle where you'll position your knife.
  • Steel the Edge: while holding your knife at a 20-degree angle to the steel, take alternating passes with your knife across the steel applying light to medium pressure. Take about a half dozen gentle slicing passes moving across the full length of your blade from heel to tip is all what is needed. Remember to give each side the same number of strokes to maintain an even cutting edge.

 


Technical description

TOTAL LENGTH 17.32 in | 440 mm
STEEL LENGTH 11.81 in | 300 mm
STEEL DIAMETER 0.51 in | 13,0 mm
WEIGHT 14.07 oz | 399 g
STEEL Alleima 12C27 (HRC 57-59)
HANDLE Polymer Santoprene™

 

Care recommendation for the EKA Butcher Pro Serie

  • The sharpening steel is machine dishwasher safe, but we always recommend washing the sharpening steel by hand.
  • To protect your sharpening steel from getting damaged, we recommend storing it on a magnetic bar.